Surface Preparation
- Remove marine growth & existing coatings from metal surfaces.
- Abrade the metal with a mechanical grinder, wire wheel or by hand sanding (80-120 Grit).
- For newly polished/repaired metals, abrade the metal surfaces to remove any slight surface oxidisation.
- Rinse metal surfaces with clean fresh water, ensuring that any abrasive residue is fully removed.
Surface Cleaning
- Apply Prop Wash using a clean cloth to scrub the surface. Do not allow to dry.
- Rinse surface with clean fresh water and wipe with a clean damp white cloth.
- Repeat until cloth shows no discolouration.
- Solvent wipe metal surfaces with acetone using a separate clean cloth.
- Keep metal surfaces dry and free from contaminants, do not touch surface.
- Continue with PropOne foul release coating application